Wednesday, July 13, 2016

ATV Bags & Boxes

Whether you choose a hard box that mounts to your rack or a soft bag it feels nice to have the ability to bring things along with you and be prepared for what can arise when you are deep in the bush.

We've tried a number of different bags & boxes and I am going to cover a number of them and give my opinions on each.

1. The Cabela's Weatherproof Extreme ATV Bag

For at least two seasons now I have ran the Cabela's Weatherproof Extreme ATV Bag. This is my number one pick and the bag I recommend to everyone. There are a number of reasons I like this one:
  • It is just the right size, not too big or small
  • It keeps my stuff dry every time, even when doing a water wheelie and dunking it right in the water
  • It's a soft bag which is much more comfortable when attached to the rack behind you
  • It's made to attach to an ATV rack and has build in buckles that are easy to use
  • If you do puncture the membrane (which I have) it's easy to patch up with silicone and a piece of rubber
  • It fits perfectly in the rear lower storage compartment of my Commander
Cabela's Weatherproof Extreme ATV Bag

I love this bag so much that even it gets destroyed, I will be buying the exact same thing. The only negative I can say about it is that to get to your items you need to undo four buckles and pull a velcro strip apart which takes more time than the others but worth it in my opinion.

2. The Stanley Fat Max Toolbox

I'm pretty sure that it was not intended for ATV's when they built it but it works pretty good. Available at any home depot for around $30 it's claim to be water resistant makes it appealing. It may be good for casual riding but for the deep water riding I was doing at the time, the seal couldn't hold up.

I probably should have used u-bolts to attach it but I didn't want to make holes in it and therefore I had issues keeping it on my rack. I purchased the smaller of the two toolboxes Stanley offered at the time which I regretted as I found it was too small for all of the items I wanted to bring with me.
  •  Easy access to your items (two latches)
  • Affordable
  • Somewhat weatherproof with the lid seal
  • Not easy to attach to your rack (other than u-bolts or straps)
  • Hard surfaces, rattling

Hard boxes like the Fat Max toolbox are hard, and a downside of all hard boxes is that they rattle. Not only do they rattle on the rack but they also rattle everything inside. Another reason my preference is a soft bag.

3. Ogio Honcho Rack Bag

The Ogio bag was what made me realize that soft is where it's at. Ogio makes a high quality product, built well and it looks great

I chose the Honcho front rack bag as it was a bit smaller than the the rear bag and also less expensive. Price is big factor when it comes to bags and boxes and this Ogio bag is one of the more expensive options, and in my opinion the value just isn't there.

The red stripe around the outside of the bag is Ogio's dust seal
 Ogio makes no claims to this bag being waterproof, so I never expected it to be. But it's not even dust proof which it does claim to be.
  • Quality construction
  • Looks great
  • Absorbs water 
  • Doesn't keep out dust
  • Straps to attach to rack are too short to be useful
  • Expensive
  • Too small although larger sizes are available
I didn't realize before purchasing this bag, how much mud and water I would be going through and so I accept the blame for that. But I couldn't believe how bad it was. On the ride that I decided that it wasn't the box for me I got caught in a heavy rain. Not only did it not keep my stuff dry, it actually absorbed the water and all my stuff inside got wet. My tools were rusty and my dry towels were soaked. It took 3 days for the bag to completely dry out from that ride and it eventually developed a musty moldy smell.

4. Hard Box

I don't know the name or brand of this box, but it only took one or two rides before I decided it wasn't for me. I both love and hate how large boxes like this are, you can carry a lot of stuff but they are clunky and get in the way when riding. This particular box has a seat back for a rear passenger which is incredibly dangerous and I wouldn't recommend ever riding two people on a machine not built to take passengers.

Poorly planned, I needed to remove the jerry can to open the box
  • Lots of room
  • Rear seat rest
  • Latches rattle open
  • Not at all weather or dust proof
  • Big and cumbersome
  • Has to be attached with u-bolts
  • Becomes a liability if there were a roll over
There are many different designs of boxes and maybe I should have tried a different one but this one turned me off on the whole concept. It was very easy to access my stuff, although in my case I attached a jerry can holder to the back and the jerry needed to be removed before I could open the lid (my bad).

My friend Paul's supposedly waterproof box
 Many people like myself assume that boxes are waterproof, or at the very least weather and dust proof and find out the hard way that they are not.

Whats your favorite or what did I miss? Leave your comments in the comments section below.

Monday, July 4, 2016

Know How To Change Your CVT Belt

A typical CVT from a Can Am (Primary Clutch on left, Secondary on right)
In my younger years riding sport quads, we never brought tools with us. And to be honest, we rarely had break downs. Those machines were simple, less moving parts and less electronics. Although easier to ride, modern ATV's are much more complicated and the chances of breakdowns have increased.

You need to be prepared! For a list of tools and supplies to bring along with you are your rides check out our article "What's in your bag?"

One of the things that has made modern ATV's easier to ride is an automatic transmission called a CVT (Constant Variable Transmission). First used in snowmobiles as far back as the 1950's, CVTs are now the most popular transmission choice for ATV manufacturers. Even the automobile industry has seen the advantages of the CVT and many current models have them.

In a CVT you have one large belt, primarily composed of rubber which connects the engine (the primary) to the wheels (the secondary). It is a much simpler set up than a geared transmission and rather than just 5 or 6 forward gears, there are an infinite number of gears as the belt rides up and down the sheaves.  

This is a great video for understanding how a CVT works

There are many positive attributes to a CVT but one big negative is that a CVT belt will wear and eventually break as compared to a geared transmission. Any ATV with a CVT is prone to a belt failure over time, but even more so if the ATV has been modified with bigger tires. A CVT belt failure will result in a complete disconnect from the engine to the wheels and leave the ATV unable to move.

  This video is what happened to me when my belt broke
was at the Bruno Rally in 2015

The upside of a belt replacement is that it is a relatively easy part to replace yourself, even on the side of a trail. If you know what you are doing.


The key is to learn how to do it when you are under ideal conditions like in your garage when you have time, so that you know how when the conditions are not ideal like on the trail while all your buddies are waiting for you.

Make inspecting your CVT belt a part of your regular maintenance on your ATV.

The procedure to change a belt isn't much harder than it is to inspect it. If you learn how to remove the various body parts blocking the cover and remove it, you are 90% there.

Search on YouTube for how to change the belt on your specific ATV, I can almost guarantee you will find one. 

Wednesday, June 29, 2016

What's in your bag?

Over the years we've gone from not bringing anything along with us on a ride, to bringing a snack and a drink to carrying tools and supplies just in case. Part of the reason for this change is how long we go riding but also the ATV itself and it's ability to carry more items.

How you carry your items is for another article, see our upcoming ATV Bags & Boxes review coming soon. For today we will talk about whats in it.

Here is a list of things that I find I like to have with me on the trail:

  • BRP tool kit - This is the tool kit that came with the ATV when I bought it. It includes all of the basics you need including secondary clutch spreading tool
  • Knife - I mostly use mine to trim branches to make roasting sticks
  • Saw - This is a small compact, portable saw but it give me the ability to cut down small trees that may be laying across the trail
  • Screwdrivers
  • Pliers
  • Vice grip
  • Sockets - Make sure you know if your ATV requires standard or metric
  • Hay wire - One of the best ways to connect two pieces together and stronger than cable ties
  • Electrical tape
  • First aid kit - If you don't carry one with you, you should
  • Complete change of clothes - Shirt, pants, underwear & socks in case you get wet when its cold
  • Cable ties
  • Water - one of the most essential parts of your kit, not only for drinking but also cleaning and topping off low coolant in a pinch
  • Extra CVT belt - You should carry a spare if you ride an ATV with a CVT
  • Tree saver - Wrap this around the tree and connect your winch to it so you don't damage the tree
  • Tow strap - In case you need to tow your buddy or be towed yourself
  • Snatch block - If you don't know what it is and you use your winch regularly you need to research this
  • Shackles - Best way to safely connect two ropes\straps to each other
Not pictured 

  • Tire repair kit
  • Air compressor or air supply
  • ATV Booster cables

A couple things I have remembered that are not as necessary but nice to have are 
  • rags
  • toilet paper or baby wipes
  • lighter

Over kill? Maybe. You can't be prepared for everything. Some people I know go even further and carry full tool kits with them including a battery operated impact wrench. What's right for you is what you need to bring but hopefully this list will help give you some ideas.

Monday, March 21, 2016

Maxxis Bighorn vs Maxxis Zillas - Tire Review

Spring is almost here and it is tire buying season. I found this article while trying to get ideas for new tires for my RZR. This comes from somebody who has had both and therefore qualified to give an opinion.

Original article located here:

Maxxis Bighorn

Maxxis Zilla
 *Edited forum post:

After approximately 5500kms on my 28" Zillas and now about 600km on my 26" bighorns there is no doubt in my mind that the bighorns are a Tire that will last longer...but that is it...the Zillas IMO are a FAR superior tire...

Better in Snow for handling and traction
Better in Mud (of course)
Better on Dirt Trails
Better on Paved (but wear faster)

There is not one thing better for the Big Horns other than that they will last longer...

The Zillas with hard riding should still last a good 10,000km.


One word SLOPPY. I’m spinning all the time...never any traction and just all over the place.

Spin some still but they dig. The handling is crazy they dig around corners, traction is unbelievable for snow riding


They are fine and smooth riding but traction is lacking in dry grass. I have trouble wheeling my machine (with a rear seat). Handling is still good but when going fast around corners the front slide more than they should and it's hard to drift around corners when the fronts are sliding.

Smooth and traction is incredible. In wet grass I can wheelie my machine sitting on the air box. Handling is good even for a 28" tire. I can drift and the fronts stick to the ground.


These tires actually perform really well in the mud, you do get a sloppy feel, and they spin like crazy but very seldom will you get stuck. Water wheelies are a lot harder but can still be done

Hands down perform a lot better than horns in every aspect.


This is where the radial of the Big Horns come in. The Big Horns are a tough tire. I have seen some with holes in the sidewalls and tread but they are all around a tough tire. They do grip better on rocks than any other situation but that is obvious.

Not as tough as Bighorns but still pretty tough. I have put a sharp rock through the tread in one of my Zillas but nothing a plug couldn’t fix. Again the Zillas do grip better but Big Horns are the tougher tire.


On paved, the only good thing about the BHs is that they will last a long time. They have a slight wobble at a higher speeds (80km/h plus) but if you look at the big horns there is a little yellow dot with a black dot in the middle on the white lettering side because theycome balanced from factory and those little dots are supposed to be lined up with the valve stem. If you don't line them up you may get a bit of a wobble. Mine are not lined up so that is most likely where the wobble is coming from. With this in mind the BHs are probably as smooth as the Zillas.

Again traction is awesome, they are extremely smooth at high speeds and even smoother than the big horns. But they will wear fast if doing a lot of paved riding. I don’t mean just being on paved the odd time...I mean paved all the time.


The 28" Zillas weight in at a total of 98.6lbs for all four tires. The 26" Bighorns weight a total of 103.4lbs. Other than the bigger diameter the 26" Big Horns are on a 14" rim.

So I was able to gain two inches in tire size and still shed some weight.


There is no doubt in my mind that the bighorns will last longer, but that is the only advantage I can see. The Zillas are a far superior tire and even with hard riding they should still last a good 10,000km.

After buying the bighorns and retiring the Zillas I plan to switch back and the Big Horns will be up for sale. I hope this helps someone else with their purchase decision.

Friday, November 6, 2015

All of my ATV's

As you can tell, I have had a lot of ATVs and done a lot of buying and selling. I put together a photo album on Facebook with all of the various machines and some of my favorite memories.

You can see them here

Thursday, October 22, 2015

How to Make Money Buying & Selling ATV's

Make money buying and selling ATV's? Most people don't think it's possible. Normally ATVing costs you money. But what if you could enjoy riding as much as ever AND have it make you a buck or two? Sounds too good to be true.

2015 was a good year for me buying and selling. Its not all bubbles and sparkles, I had some misfortunes. But your going to have that no matter what. Plan for those misfortunes and if you buy right you'll make money in the end.

But you've got to buy smart, here is how:
  •  If possible, buy off season - For many here in Canada, the ATV season ends when the snow flies. As such people are more likely to sell in the middle of winter if they run into financial problems. But buyers are sparse and the prices come down.
  • Choose one particular brand\model ATV and learn it - Get to know all the good and the bad. Research common mechanical failures and what to look for when you see the machine in person. Get to know the local selling prices on your classified site, this may take some time but will pay off.
  • Look for the ones that are poorly advertised - Bad pics, bad description, no asking price. All of these can be to your advantage when buying because the other, less educated buyers may have looked past them because they were not advertised well.
  • Look for the ones out of town - Driving 60 miles may be the difference between a deal and just market price. Many buyers are not willing to drive out of town at all and therefore the out of town prices are often lower.
  • Don't buy new...ever - You'll always lose your shirt if you think you can flip it. No matter how good a deal the dealer gave you, once it leaves the dealer it is a used machine and will never carry the value of new. 
  • Clean or accessorize to change the look - New wheels and tires can go a long way to change the look of an ATV and a good cleaning is vital for increasing resale.
  • Get the seller to add items in - If the seller isn't willing to negotiate price you may be able to increase the value with add ins. Loading ramps, storage boxes, factory wheels & tires are examples of various addons I've been able to get sellers to include which I have been able to sell.  
Don't forget that getting use out of an ATV factors into the value to you. Say for example that you bought in spring and sold in fall and got the same price you bought it for. But you got to ride it all season, you've made a profit!

Here are some of the ATV's I have purchase this year (2015):

2012 Outlander 800XT - Purchased for $8500

2012 Outlander 800XT as purchased from local dealer
I was not happy with the wheels\tires, the rad relocate or the footwells. So I sold the wheels\tires & rad relocate and bought used ones I did like from our local classifieds site. I ended up making $400 on the the this swap. I also had the footwells powder coated black at a cost of $50 because the yellow looked bad.

How I made my money: Two things, bought in the dead of winter from a dealer that had it in inventory for too long and I recognized that it didn't have much eye appeal and that by making a couple small changes I could increased the value. 

2012 Outlander 800XT as sold
I owned it for a total of 4 months and had multiple rides on it.

The final tally:

$8500 Purchase
$-400 Parts Swap
$   50 Powdercoating
$8150 Total Investment
$8800 Selling Price
$650 Profit

2008 Polaris RZR 800

2008 Polaris RZR 800 as purchased
Wheels and tires were the only thing I changed on this machine. It was crazy clean, but looked very plain. I figured a quick dress up would increase the value and I was right.

How I made my money: The seller wanted to get rid of it fast and priced it low, which scared away many potential buyers. He also posted dark pictures with very little detail. It was located 10 miles out of the city so there was some driving time. I didn't have to haggle much on price because it was already priced right. I found some aluminum wheels\tires and took some detailed pictures in the sun. It sold quickly.

2008 Polaris RZR 800 as sold

Only rode it once and then sold it. It was too nicely cleaned and detailed to get it messed up.

The final tally:

$5600 Purchase
$ 200Wheels\Tires

$5800 Total Investment
$6600 Selling Price
$800 Profit

2013 Can Am Maverick 1000XRS

2013 Can Am Maverick 1000XRS as purchased
This was by far my most profitable transaction of 2015 and I really wanted to keep it. I was able to find a desperate seller in a small town 60 miles from where I live. The owner included both the aftermarket wheels\tires in the picture above as well as the factory wheels\tires. One more opportunity to increase my profit.

How I made my money: It was advertised for $12,000 which was the cheapest Maverick for sale, this made the seller look desperate. It was out of town, pictures were poor and the machine was dirty. I took a risk by driving an hour to look at it but it but this also kept other buyers away. The seller volunteered to drop the price by $2000 in our conversation without any negotiating, and he also offered the factory wheels and tires with it.

2013 Can Am Maverick 1000XRS as sold
I got a couple of really great rides on this machine and some great footage for my videos.

The final tally:

$10,000 Purchase
$-800 Sold Aftermarket Wheels\Tires
$ 200 Dealer inspection
$9400 Total Investment
$12,500 Selling Price
$3100 Profit

Buy right and you can make money too. The key is to be educated and ready, but not impulsive. Good luck!

Thursday, October 1, 2015

Foxford SK ATV Rally Review - 2015

In 2014 I headed out to Foxford for my first experience at an ATV rally. It was overwhelming to say the least, you can read up on that here.

Quick Walmart stop on the way for snacks and McDonalds
In 2015 I headed back, but where as last time I rode the extreme trails this year I took the dry trail.
Last year they had three options, dry, wet and extreme. This year it was only wet and dry. The two people accompanying me were my son and friend Jonathan both with stock machines so I decided I would leave the mud behind this year.

The staging area was changed this year and as such it seemed like there were less machines even though I think the official count was the same. In 2014 you staged and the main meeting area were in the same place, and it was very lively. Seemed like a big parking lot party where as this year with the two separate areas it seemed more empty.

The Trail
We left the staging area and hit the dry trail which consisted of riding down an old rail line minus the tracks. Eventually we turned and drove down a gravel grid rode until we finally hit the forest, now the trail got good. As soon as we entered the forest area we hit a very muddy area and I was all in my glory. Even though it was deep there were work arounds so that my son and Jonathan could go around. We hit a couple smaller mud holes but the further we went in the dryer it got. Of course I was hitting every bit of water and mud I could find.

Rest stop area

Before long we found ourselves at a beautiful rest stop beside a lake. We chatted with a few of the other riders, grabbed some grub and continued on our way not knowing how long the trail was. We continued down some more tighter twisty forest trail which eventually hit a section of the stickiest, gummiest clay mud I have ever seen....which of course I had to head straight into and get myself stuck real good.

My Outlander clogged full of the stickiest gumbo I have ever seen on a trail
Once I got myself winched out we hit a grid road which took us back to the staging area. It seemed way too short, had we not stopped along the way we could have made the round trip in an hour. So if I had a complaint it would be that it was too short.

It didn't feel like we were done yet, we had some food at the concession and headed back out to the trail. Unfortunately my son's 650 died on grid road just before getting into the forest and our day was over.

I appreciate the wash area they set up each year, this is just a waterpump in a slough with a hose attached but it is very much appreciated leaving some of the mud behind.

Winching out of the ruts I should have known I would hang up on

That sticky clay we encountered stains the black plastics of your machine pretty bad and it even has the ability to resist a direct spray from a pressure washer for short periods of time. Nasty stuff.

So it wasn't the crazy mind blowing\numbing experience that it was the first year but I heard the wet trails were as deep as ever. I think I'd like to go back to the extreme trails next year, and have the full Foxford experience. After all that's what this rally is famous for.